IBM Books

Nways Multiprotocol Access Services Software User's Guide Version 3.3

Index

Numerics
A B C D E F G H I K L M N O P Q R S T U V W X
Numerics
  • 10/100 Ethernet configuration commands
  • accessing (4601)
  • 10/100-Mbps Ethernet configuration commands
  • duplex (4605)
  • exit (4613)
  • ip-encapsulation (4607)
  • list (4609)
  • 10/100-Mbps Ethernet monitoring commands (4619)
  • accessing (4615)
  • collisions (4617)
  • summary (4616)
  • 2216
  • host definition, required activities (4821)
    • A
  • AAA attributes, remote (5752)
  • accessing
  • change management
  • accessing (4008)
  • summary (4010)
  • channel interface
  • configuring (4988)
  • console (5039)
  • console process (5035)
  • protocol
  • configuration process (3928)
  • operating (monitor) process (3929)
  • second-level process (3897), (3907)
  • accessing the mp configuration prompt (5536)
  • accessing the mp monitoring commands (5541)
  • activate
  • GWCON command (4167)
  • activating spare interfaces (4168)
  • add
  • add (5602)
  • ATM configuration command (4748)
  • ATM Virtual Interface configuration command (4763)
  • change management configuration command (4012)
  • channel adapter (4997)
  • CONFIG command (4062)
  • ELS configuration command (4279)
  • Frame Relay configuration command (5273)
  • SDLC configuration command (5587)
  • SDLC monitoring command (5601)
  • SDLC Relay configuration command (5550), (5552)
  • X.25 configuration command (5122)
  • XTP configuration command (5163)
  • XTP monitoring command (5179)
  • add device example
  • multilink PPP (3917)
  • adding (3913)
  • dial-in circuit
  • example (3914)
  • multilink PPP circuit
  • example (3916)
  • address registration in LAN emulation (4696)
  • address resolution in LAN emulation (4699)
  • address wildcards, DTE (5147)
  • addresses
  • ISDN (5650)
  • addresses, entering
  • ATM (4733)
  • advanced
  • ELS configuration command (4281)
  • ELS monitoring command (4343)
  • analysis of problems (4928)
  • AppleTalk Control Protocol
  • for PPP (5422)
  • APPN
  • LA loopback, configuring (5019)
  • LSA
  • configuring the 2216 (4941)
  • configuring the VTAM host (4878)
  • IBM 2216, configuring (4956)
  • APPN HPR Control Protocol
  • for PPP (5450)
  • APPN ISR Control Protocol
  • for PPP (5453)
  • ARP configuration
  • config (4793)
  • list (4795)
  • remove (4796)
  • set (4794)
  • ATCSTRxx, VTAM initialization file (4912)
  • ATM
  • how to enter addresses (4734)
  • ATM addresses of LAN emulation components (4650)
  • ATM addressing (4647)
  • ATM configuration commands
  • accessing (4737)
  • add (4747)
  • disable (4759)
  • enable (4757)
  • interface (4745)
  • LE-Client (4741)
  • LE-Services (4742)
  • list (4749)
  • qos (4751)
  • remove (4753)
  • set (4755)
  • summary (4740)
  • ATM LLC monitoring command
  • list (4784)
  • ATM monitoring commands
  • accessing (4768)
  • atm-llc (4772)
  • interface (4770), (4774), (4782)
  • list (4776)
  • summary (4769)
  • trace (4778)
  • wrap (4780)
  • ATM network interface
  • monitoring (4735)
  • using (4732)
  • ATM Virtual Interface configuration commands
  • add (4762)
  • list (4764)
  • remove (4766)
  • summary (4761)
  • ATM Virtual Interface monitoring commands
  • summary (4786)
  • atm-llc
  • ATM monitoring commands (4773)
  • attributes, remote AAA (5753)
  • authentication
  • configuring PPP interface (5414)
  • remote device
  • configuring PPP interface to use (5416)
  • Auto-negotiation on the 10/100-Mbps Ethernet Interface (4592)
    • B
  • backup peer function, XTP (5150)
  • Backward Explicit Congestion Avoidance (5263)
  • Backward Explicit Congestion Notification (BECN)
  • Frame Relay (5216)
  • Banyan VINES Control Protocol (BVCP)
  • for PPP (5425)
  • basing configuration
  • on existing (3894)
  • BCM (4715)
  • Support for IP (4716)
  • Support for IPX
  • BCM IPX Server Farm (4717)
  • preventing a LEC from being treated as (4718)
  • support for NetBIOS (4720)
  • NetBIOS Namesharing (4721)
  • support for Source Route Bridging (4722)
  • BCM IPX Server Farm
  • preventing a LEC from being treated as (4719)
  • benefits of LAN emulation (4629)
  • bilateral closed user groups
  • overview (5096)
  • boot
  • CONFIG command (4068)
  • Boot CONFIG
  • process
  • entering from CONFIG (4069)
  • Boot CONFIG commands
  • timedload (4033)
  • boot configuration database
  • displaying (4025)
  • bridging
  • through LCS
  • parameters (4946)
  • Bridging Control Protocol (BCP)
  • for PPP (5428)
  • bridging, configuring using quick configuration (5710)
  • Broadcast and Unknown Server (4641), (4704) See also BUS
  • broadcast manager (4714)
  • buffer
  • GWCON command (4171)
  • BUS (4624), (4640)
  • connecting to (4703)
  • functions of (4707)
    • C
  • cable type, clocking and (5089)
  • call verification
  • ISDN (5656)
  • callback
  • dial circuit monitoring command (5705)
  • Callback Control Protocol (CBCP)
  • for PPP (5431)
  • calls
  • ISDN monitoring command (5679)
  • V.25bis monitoring commands (5637)
  • change
  • CONFIG command (4071)
  • Frame Relay configuration command (5284)
  • X.25 configuration command (5124)
  • XTP configuration command (5165)
  • change management
  • accessing (4007)
  • commands available from (4009)
  • configuring (4006)
  • models (4001)
  • understanding (4000)
  • change management configuration commands
  • add (4011)
  • copy (4013)
  • describe (4015)
  • disable (4017)
  • enable (4019)
  • erase (4021)
  • list (4023)
  • lock (4027)
  • set (4029)
  • tftp (4031)
  • unlock (4035)
  • update-firmware (4037)
  • channel adapter
  • accessing the console process (5037)
  • configuration commands
  • add (4996)
  • delete (5021)
  • list (5027), (5030)
  • mod (5024)
  • set (5033)
  • summary (4994)
  • configuring interface (4979)
  • interface monitoring commands
  • dump_adapter (5051)
  • hidtrace (5053)
  • list (5046)
  • net (5049)
  • summary (5044)
  • trace (5055)
  • tune (5057)
  • LAN Channel Station (LCS)
  • configuring the 2216 (4940)
  • configuring the MVS host for TCP/IP (4851)
  • overview (4938)
  • LCS interface monitoring commands
  • list (5061)
  • summary (5059)
  • tune (5064)
  • Link Services Architecture (LSA)
  • APPN connection (4955)
  • direct connection (4951)
  • DLSw local conversion (4964)
  • host control blocks (4863)
  • overview (4949)
  • LSA interface monitoring commands
  • list (5070)
  • summary (5068)
  • tune (5074)
  • MPC+ interface monitoring commands
  • list (5080)
  • summary (5078)
  • tune (5083)
  • Multi-Path Channel+ (MPC+)
  • configuring APPN (4971)
  • configuring the MVS host for TCP/IP (4854)
  • configuring the VTAM host (4901), (4917)
  • Local SNA Major Node control block (4899), (4915)
  • overview (4968)
  • Transport Resource List (TRL) control block (4900), (4916)
  • overview (4931)
  • TCP/IP passthru
  • configuring2216 (4943)
  • using (4816)
  • channels
  • ISDN monitoring command (5681)
  • CHAP
  • authentication for PPP (5412)
  • configuration (5472)
  • monitoring (5502)
  • CIR
  • monitoring (5251), (5255)
  • orphan permanent virtual circuit CIR (5236)
  • relationship to VIR (5252)
  • Circuit congestion (5253)
  • responding with throttle down (5254)
  • circuit contention
  • ISDN (5653)
  • Circuit Information Rate (CIR) (5235)
  • circuits
  • ISDN monitoring command (5683)
  • V.25bis monitoring commands (5639)
  • clear
  • CONFIG command (4077)
  • ELS configuration command (4283)
  • ELS monitoring command (4345)
  • Frame Relay monitoring command (5365)
  • GWCON command (4174)
  • PPP monitoring command (5503)
  • SDLC monitoring commands (5603)
  • clear-counters
  • LLC monitoring command (4564)
  • clear-port-statistics
  • SDLC Relay monitoring command (5570)
  • CLLM
  • description of (5232)
  • CLLM support (5264)
  • clock, setting and changing (4152)
  • clocking and cable type (5088)
  • closed user groups
  • configuring (5104)
  • cug 0 override (5102)
  • establishing X.25 circuits (5100)
  • extended
  • types of (5098)
  • overview (5094)
  • XTP support
  • overview (5155)
  • closing a telnet session (3998)
  • collisions
  • 10/100-Mbps Ethernet monitoring command (4618)
  • Ethernet monitoring command (4588)
  • command
  • exit (3884)
  • command history (3939), (3940)
  • commands
  • entering (3870)
  • Committed Burst Size
  • definition (5237)
  • relationship to maximum frame size (5238)
  • components of LAN emulation (4631)
  • CONFIG commands
  • add (4061)
  • boot (4067)
  • change (4070)
  • clear (4076)
  • delete (4079)
  • disable (4085)
  • disable-completion (4089)
  • enable (4091)
  • Enable-completion (4094)
  • event (4096)
  • features (4099)
  • List (4107)
  • load (4113)
  • network (4115)
  • patch (4118)
  • protocol (4120)
  • qconfig (4127)
  • set (4129)
  • summary of (4060)
  • system retrieve (4147)
  • system view (4149)
  • time (4150)
  • unpatch (4156)
  • update (4158)
  • write (4161)
  • CONFIG process
  • accessing (3898)
  • commands available from (4059)
  • description of (4039)
  • entering (3899), (4057)
  • exiting (4058)
  • system dumps (4055)
  • Config-Only mode
  • description (4040)
  • entering automatically (4041)
  • manual entry (4042)
  • configuration
  • accessing commands (4980)
  • accessing the mp prompt (5538)
  • APPN
  • loopback (5017)
  • basing on existing (3891)
  • channel adapter interface
  • add (4995)
  • required actions (4981)
  • channel interface
  • delete (5020)
  • list, command (5026), (5029)
  • mod, command (5023)
  • set, command (5032)
  • summary of commands (4993)
  • displaying information about (4178)
  • first (3889)
  • GWCON command (4177)
  • host
  • planning for definition (4819)
  • required for defining connection (4820)
  • LCS
  • subchannel (5002)
  • virtual interface (4998)
  • LSA
  • APPN connection (4958)
  • direct connection (4953)
  • direct connection at VTAM host (4871)
  • DLSw connection at 2216 (4962)
  • DLSw local conversion at 2216 (4967)
  • subchannel (5008)
  • virtual interface (5005)
  • MPC+ (4970), (4973), (4976)
  • subchannel (5014)
  • virtual interface (5011)
  • MVS host for TCP/IP (4849)
  • network command, channel adapter (4990)
  • network interfaces (3921)
  • OPCON command (3912), (3949)
  • overview (4817)
  • reconfiguration (4930)
  • suggestions (3887)
  • updating (3892)
  • updating memory (4160)
  • VTAM host
  • APPN connection (4880)
  • DLSw connection (4888)
  • MPC+ (4907), (4923)
  • configuration commands
  • GWCON prompt (3935)
  • multilink PPP protocol (mp) (5540)
  • set prompt-level
  • add prefix to hostname (4133)
  • Configurations That May Result in Link Activation Failure (4596)
  • Configurations That May Result in Mismatched Duplex Modes During Operation (4598)
  • configuring
  • DECnet (5731)
  • encryption (5498)
  • ESCON channel adapter (4985)
  • FDDI (4545)
  • IP (5713)
  • IPX (5721)
  • multilink PPP interface (5523)
  • for multi-chassis MP (5533)
  • on dial circuits (5524)
  • on Layer-2-Tunneling nets (5530)
  • on serial links (5527)
  • OPCON (3942)
  • parallel channel adapter (PCA) (4986)
  • PPP callback (5418)
  • TCP/IP passthru (4944)
  • user access (4047)
  • virtual connections (VC) (5463)
  • XTP (5161)
  • configuring spare interfaces (4050)
  • activating (4169)
  • configuring (4051)
  • defining (4484)
  • restrictions (4053)
  • Configuring Values Other than Auto for Duplex (4594)
  • Congestion monitoring (5256)
  • Congestion notification and avoidance
  • Backward Explicit Congestion Avoidance (5261)
  • Forward Explicit Congestion Avoidance (5260)
  • connecting to a process (3872)
  • connecting to the BUS (4705)
  • connection request timer (5152)
  • connector-Type
  • Ethernet configuration command (4578)
  • considerations
  • multilink PPP protocol (MP) (5517)
  • virtual connections (VC) (5460)
  • console
  • OPCON command (3951)
  • console process, accessing (5036)
  • consolidated link layer management (CLLM)
  • description of (5231)
  • coprocessor
  • accessing configuration process (3911)
  • copy
  • change management configuration command (4014)
  • CPU
  • displaying memory usage of (4200)
  • create
  • ELS net filter configuration commands (4321)
  • ELS net filter monitoring commands (4417)
    • D
  • data direct VCCs (4710)
  • Data Link Connection Identifier (DLCI)
  • Frame Relay (5192), (5209)
  • date, setting and changing (4153)
  • DDN
  • default settings (5736)
  • DECnet Control Protocol (DNCP)
  • for PPP (5434)
  • DECnet, configuring (5732)
  • default
  • ELS configuration command (4285)
  • defining 2216
  • to operating system (4838)
  • delete
  • channel adapter (5022)
  • CONFIG command (4080)
  • delete (5606)
  • dial circuit configuration command (5697)
  • ELS configuration command (4287)
  • ELS net filter configuration commands (4323)
  • ELS net filter monitoring commands (4419)
  • ISDN (4083)
  • SDLC configuration command (5589)
  • SDLC monitoring command (5605)
  • SDLC Relay configuration command (5553), (5555)
  • X.25 configuration command (5126)
  • XTP configuration command (5167)
  • XTP monitoring command (5181)
  • deleting configuration information (4078)
  • describe
  • change management configuration command (4016)
  • description of OPCON (3944)
  • device
  • displaying time statistics about (4221)
  • exiting (3858)
  • rebooting (3980)
  • reloading (3855), (3901)
  • device consoles
  • local (3842)
  • remote (3845)
  • using (3840)
  • device processes
  • attaching to (3989)
  • connecting to (3871)
  • displaying information about (3984)
  • device software
  • reloading (3981)
  • user interface (3841)
  • diags
  • OPCON command (3953)
  • dial circuit configuration commands
  • delete (5698)
  • encapsulator (5700)
  • list (5702)
  • set (5704)
  • summary of (5696)
  • dial circuit monitoring commands
  • callback (5706)
  • dial circuits
  • adding (5624), (5663)
  • configuring (5625), (5664)
  • configuring for MP (5525)
  • ISDN (5649)
  • dial-in circuit
  • add device example (3915)
  • dial-in circuits
  • virtual connections (VC) (5458)
  • configuring (5464)
  • considerations (5461)
  • direct connection, LSA, configuring (4954)
  • disable
  • ATM configuration command (4760)
  • authentication protocols (5475)
  • change management configuration command (4018)
  • CONFIG command (4086)
  • data compression (5474)
  • ELS net filter configuration commands (4325)
  • ELS net filter monitoring commands (4421)
  • Frame Relay configuration command
  • cir-monitor (5288)
  • Frame Relay monitoring command (5367)
  • GWCON command (4182)
  • Lower DTR (5476)
  • multilink protocol (5473)
  • performance configuration command (4451)
  • performance monitoring command (4463)
  • SDLC configuration command (5591)
  • SDLC link establishment connection (5607)
  • SDLC Relay configuration command (5556), (5558)
  • SDLC Relay monitoring command (5572)
  • X.25 configuration command (5112)
  • XTP configuration command (5171)
  • disable-completion
  • CONFIG command (4090)
  • display
  • ELS configuration command (4290)
  • ELS monitoring command (4347)
  • display hostname (4140)
  • display hostname software VPD (4144)
  • display hostname with carriage return (4145)
  • display hostname with changes (4141)
  • display hostname with date (4143)
  • display hostname with time (4142)
  • displaying
  • boot configuration database (4026)
  • displaying monitoring prompt (5041)
  • divert
  • OPCON command (3955)
  • DLCI (Data Link Connection Identifier)
  • Frame Relay (5194)
  • DLSw connection
  • configuring
  • 2216 (4961)
  • local conversion at the 2216 (4966)
  • VTAM host (4887), (4894)
  • LSA (4959), (4963)
  • DOS
  • assembling a load file (5739)
  • disassembling a load file (5745)
  • DTE address wildcards (5146)
  • dump
  • Fast Token-Ring monitoring command (4534)
  • Token-Ring monitoring command (4507)
  • dump_adapter, channel interface monitoring command (5050)
  • duplex
  • Ethernet configuration command (4606)
  • duplicate policy values (4686)
  • dynamic routing
  • OSPF (5718)
  • RIP (5717)
    • E
  • ELAN name policy (4677)
  • ELAN type policy (4680)
  • ELS
  • els
  • capturing output using Telnet (4252)
  • concepts of (4235)
  • description of (4233)
  • entering (4098)
  • how to use (4250)
  • interpreting messages (4237)
  • message buffering
  • overview (4273)
  • monitoring (4275)
  • OPCON command (3958)
  • reloading (4380)
  • remote logging
  • additional considerations (4265)
  • duplicate logging (4269)
  • messages containing IP addresses (4267)
  • output (4263)
  • recurring sequence numbers (4271)
  • remote-logging (4312), (4386)
  • setting up traps (4253)
  • storing (4383)
  • tracing (4313), (4388)
  • trapping (4387), (4396)
  • troubleshooting example 1 (4255)
  • troubleshooting example 2 (4256)
  • troubleshooting example 3 (4257)
  • using to troubleshoot (4254)
  • ELS configuration
  • entering and exiting (4234)
  • ELS configuration commands
  • add (4278)
  • advanced (4280)
  • clear (4282)
  • default (4284)
  • delete (4286)
  • display (4289)
  • filter (4291)
  • list (4293)
  • message buffering (4330)
  • list (4332)
  • log (4334)
  • nolog (4336)
  • set (4338)
  • nodisplay (4295)
  • noremote (4298)
  • notrace (4301)
  • notrap (4303)
  • remote (4306)
  • set (4309)
  • summary of (4277)
  • trace (4391)
  • trap (4316)
  • ELS configuration environment
  • entering and exiting (4276)
  • ELS console environment
  • 2216 remote logging
  • configuration (4262)
  • level
  • defined (4259)
  • remote logging (4258)
  • remote workstation
  • configuration (4261)
  • syslog facility
  • defined (4260)
  • ELS messages (4246)
  • enabling logging to a remote file (Remote) (4308), (4372)
  • explanation (4243)
  • groups (4248)
  • logging level (4242)
  • managing rotation (4251)
  • network information (4247)
  • suppressing display of (4297)
  • suppressing display of (nodisplay) (4356)
  • suppressing remote log (noremote) (4300), (4359)
  • suppressing tracing (4362)
  • suppressing trapping (4305), (4366)
  • suppressing trapping of (notrap) (4365)
  • trace (4314)
  • tracing (4393)
  • trapping (4315), (4397)
  • ELS monitoring commands
  • advanced (4342)
  • clear (4344)
  • display (4346)
  • files (4348)
  • filter (4350)
  • list (4352)
  • message buffering (4426)
  • flush (4428)
  • list (4430)
  • log (4432)
  • nolog (4434)
  • read-file (4436)
  • set (4438)
  • tftp (4440)
  • view (4442)
  • write-buffer (4444)
  • nodisplay (4354)
  • noremote (4357)
  • notrace (4360)
  • notrap (4363)
  • remote (4370)
  • remove (4373)
  • restore (4376)
  • retrieve (4378)
  • save (4381)
  • set (4384)
  • statistics (4389)
  • summary (4341)
  • trap (4394)
  • view (4398)
  • ELS net filter configuration commands
  • create (4320)
  • delete (4322)
  • disable (4324)
  • enable (4326)
  • list (4328)
  • overview (4318)
  • ELS net filter monitoring commands
  • create (4416)
  • delete (4418)
  • disable (4420)
  • enable (4422)
  • list (4424)
  • overview (4414)
  • ELS operating environment
  • entering and exiting (4340)
  • EMIF
  • example IOCP definition (4832)
  • enable
  • ATM configuration command (4758)
  • authentication protocols (5479)
  • change management configuration command (4020)
  • CHAP (5481)
  • CONFIG command (4092)
  • data compression (5478)
  • ELS net filter configuration commands (4327)
  • ELS net filter monitoring commands (4423)
  • Frame Relay configuration command (5305)
  • Frame Relay monitoring command (5372)
  • GWCON command (4185)
  • Lower DTR (5482)
  • multilink protocol (5477)
  • PAP (5480)
  • performance configuration command (4453)
  • performance monitoring command (4465)
  • SDLC configuration command (5593)
  • SDLC monitoring command (5608)
  • SDLC Relay configuration command (5559), (5561)
  • SDLC Relay monitoring command (5574)
  • X.25 configuration command (5110)
  • XTP configuration command (5169)
  • enable lmi (5362)
  • Enable-completion
  • CONFIG command (4095)
  • encapsulation type (5730)
  • encapsulator
  • dial circuit configuration command (5699)
  • encryption
  • configuring (5499)
  • end system identifier (4643)
  • environment, lower level
  • exiting (3881)
  • erase
  • Change management configuration command (4022)
  • error
  • GWCON command (4187)
  • ESCON
  • overview (4933)
  • ESCON channel adapter
  • configuring (4982)
  • Multi-Path Channel+ (MPC+)
  • configuring TCP/IP (4977)
  • configuring UDP+ (4974)
  • ESI (4642)
  • Ethernet
  • 10/100-Mbps network interface
  • configuring (4600)
  • displaying statistics (4571)
  • displaying statistics 10/100-Mbps (4591)
  • encapsulation type (5729)
  • encapsulation types for IPX (5728)
  • network interface
  • configuring (4572)
  • Ethernet 10/100-Mbps network interface
  • auto-negotiation on the 10/100-Mbps Ethernet Interface (4593)
  • Configurations That May Result in Link Activation Failure (4597)
  • Configurations That May Result in Mismatched Duplex Modes During Operation (4599)
  • configuring values other than Auto for duplex (4595)
  • using (4590)
  • Ethernet configuration commands
  • accessing (4573)
  • connector-Type (4577)
  • ip-encapsulation (4579), (4797)
  • list (4581)
  • physical-address (4584), (4612)
  • summary (4576), (4604)
  • Ethernet monitoring commands (4589)
  • collisions (4587)
  • summary (4586)
  • Ethernet network interface
  • using (4570)
  • Ethernet operating commands
  • accessing (4585)
  • event
  • CONFIG command (4097)
  • GWCON command (4189)
  • OPCON command (3960)
  • event logging
  • subsystem (4239)
  • event number parameter (4241)
  • Events
  • Causes (4236)
  • examples
  • 2216 definition to HPDT UDP for MVS or VM (4861)
  • 2216 definition to TCP/IP for MVS or VM for LCS (4857)
  • 2216 definition to TCP/IP for MVS or VM for MPC+ (4859)
  • IOCP
  • definition for EMIF host (4831)
  • definition for ESCON channel (4829)
  • definition for parallel channel adapter (4833)
  • switched major node definition file
  • LSA APPN connection at VTAM host (4883)
  • LSA direct connection at VTAM host (4875)
  • LSA DLSw connection at VTAM host (4891)
  • LSA DLSw local conversion at VTAM host (4897)
  • VTAM control block (4868)
  • XCA major node definition file
  • LSA APPN connection at VTAM host (4881)
  • LSA direct connection at VTAM host (4873)
  • LSA DLSw connection at VTAM host (4889)
  • LSA DLSw local conversion at VTAM host (4895)
  • VTAM control block (4866)
  • Excess Burst Size
  • definition (5239)
  • setting for Frame Relay (5241)
  • exit
  • 10/100-Mbps Ethernet configuration command (4614)
  • exit command (3883)
  • exiting
  • lower level environments (3882)
  • exiting the device (3857)
    • F
  • Fast Token-Ring configuration commands
  • accessing (4514)
  • enabling for LLC (4529)
  • list (4517)
  • LLC (4519), (4537)
  • media (4522)
  • packet-size (4524)
  • set (4526)
  • source-routing (4528)
  • speed (4531)
  • summary of (4515)
  • Fast Token-Ring interface
  • statistics displayed for (4539)
  • Fast Token-Ring monitoring commands
  • dump (4535)
  • summary of (4533)
  • Fast Token-Ring network
  • configuring (4513)
  • FDDI
  • configuring (4544)
  • GWCON (4554)
  • FDDI (Fiber Distributed Data Interface)
  • using (4540)
  • FDDI and GWCON (4553)
  • FDDI configuration commands (4547)
  • accessing (4546)
  • list (4548)
  • set (4549)
  • FDDI monitoring commands
  • accessing (4550)
  • list (4551)
  • SRT-STATS (4552)
  • FDDI overview (4541)
  • features (4101)
  • accessing configuration and console processes (3926)
  • Bandwidth reservation (4105)
  • bandwidth reservation (4193)
  • CONFIG command (4100)
  • Encoding subsystem (4106)
  • GWCON command (4191)
  • MAC filtering (4103), (4194)
  • Thin server function (4104)
  • WAN restoral (4192)
  • WAN restoral/reroute (4102)
  • Fiber Distributed Data Interface See also FDDI (Fiber Distributed Data Interface), FDDI (Fiber Distributed Data Interface)
  • overview (4542)
  • protocols supported (4543)
  • files
  • ELS monitoring command (4349)
  • filter
  • ELS configuration command (4292)
  • ELS monitoring command (4351)
  • first
  • configuration (3890)
  • Flow control
  • packets (4172)
  • flush
  • OPCON command (3962)
  • forum-compliant LEC
  • ARP configuration (4792)
  • configuring a specific client (4791)
  • Forward Explicit Congestion Avoidance (5262)
  • Forward Explicit Congestion Notification (FECN)
  • Frame Relay (5214)
  • Frame Relay (5197)
  • accessing configuration (5266)
  • Backward Explicit Congestion Notification (5215)
  • Bandwidth Reservation (5265)
  • circuit information rate (5234)
  • command/response (5211)
  • configuring (5267), (5270)
  • congestion notification and avoidance (5259)
  • Data Link Connection Identifier (DLCI) (5210)
  • data rates (5233)
  • discard eligibility (5217)
  • DLCI (Data Link Connection Identifier) (5193)
  • enabling PVC management (5268)
  • enabling SVC management (5269)
  • excess burst size (5240)
  • extended address (5212)
  • Forward Explicit Congestion Notification (5213)
  • frame format (5205)
  • frame forwarding described (5219)
  • HDLC flags (5207)
  • interface initialization (5196)
  • introduction (5186)
  • LAPD datalink protocol (5190), (5206)
  • line speed (5243)
  • LMI management entities (5223)
  • management status reporting (5228)
  • description (5227)
  • full status report (5229)
  • link integrity verification report (5230)
  • maximum information rate (5246)
  • minimum information rate (5244)
  • multicast emulation (5221)
  • network (5191)
  • network interface (5271), (5393)
  • network management (5222)
  • orphan permanent virtual circuits (5199)
  • orphan switched virtual circuits (5201)
  • permanent virtual circuits (5198)
  • protocol address mapping (5220)
  • PVCs and (5203)
  • required groups (5204)
  • static ARP (5277)
  • SVC
  • FRF 4 (5226)
  • user data (5218)
  • using (5185)
  • variable information rate (5248)
  • variable information rate (VIR) (5250)
  • virtual circuits (5188)
  • Frame Relay configuration commands (5287), (5304)
  • add (5274)
  • permanent-virtual-circuit (5275)
  • protocol-address (5276)
  • add protocol-address
  • IP protocol (5278)
  • add-protocol
  • AppleTalk2 protocol (5280)
  • DN protocol (5281)
  • IPX protocol (5279)
  • change (5283)
  • disable
  • cir-monitor (5289)
  • cllm (5290)
  • compression (5291)
  • congestion (5257)
  • congestion-monitor (5292)
  • dn-length-field (5293)
  • encryption (5294)
  • fragmentation (5295)
  • lmi (5296)
  • lower-dtr (5297)
  • multicast-emulation (5298)
  • no-pvc (5299)
  • notify-fecn-source (5300)
  • orphan-circuits (5301)
  • protocol-broadcast (5302)
  • throttle-transmit-on-fecn (5303)
  • enable
  • cir-monitor (5306)
  • cllm (5307)
  • compression (5308)
  • congestion (5258)
  • congestion-monitor (5309)
  • dn-length-field (5310), (5320)
  • encryption (5311)
  • lmi (5312)
  • lower-dtr (5313)
  • multicast-emulation (5314)
  • no-pvc (5316)
  • notify-fecn-source (5315)
  • orphan-circuits (5317)
  • protocol-broadcast (5318)
  • throttle-transmit-on-fecn (5319)
  • list (5328)
  • all (5322)
  • fragmentation-capable-pvcs (5323)
  • hdlc (5324)
  • lmi (5325)
  • permanent-virtual-circuits (5326)
  • protocol-address (5327)
  • llc (5332)
  • remove
  • permanent-virtual-circuit (5335)
  • protocol-address (5336)
  • remove protocol-address
  • Appletalk2 protocol (5339)
  • IP protocol (5337)
  • IPX protocol (5338)
  • remove-protocol
  • DN protocol (5340)
  • set
  • cable (5343)
  • clocking (5345)
  • crc-type (5346)
  • default cir (5344)
  • frame-size (5348)
  • lmi-type (5349)
  • n1-parameter (5350)
  • n2-parameter (5351)
  • n3-parameter (5352)
  • p1-parameter (5353)
  • t1-parameter (5354)
  • transmit delay parameter (5355), (5356)
  • summary of (5272)
  • Frame Relay Forum Implementation Agreement 4 (FRF 4) (5225)
  • Frame Relay monitoring commands
  • clear (5364)
  • disable (5366)
  • cllm (5368)
  • notify-fecn-source (5369)
  • throttle-transmit-on-fecn (5370)
  • enable (5371)
  • cllm (5373)
  • notify-fecn-source (5374)
  • throttle-transmit-on-fecn (5375)
  • list (5376)
  • all (5378)
  • circuit (5379)
  • lmi (5380)
  • permanent-virtual-circuits (5381)
  • pvc-groups (5382)
  • llc (5386)
  • notrace (5388)
  • set (5389)
  • summary of (5363)
  • trace (5392)
  • Frame Relay permanent virtual circuits (PVC)
  • changing (5285)
  • Frame Relay switched virtual circuits (SVC) (5195)
  • adding (5282)
  • changing (5286)
  • listing (5329), (5330), (5383), (5384)
  • removing (5341)
  • functions of the BUS (4708)
    • G
  • getting help (3879)
  • group
  • deleting (4288)
  • group name parameter (4249)
  • GTE-Telenet
  • default settings (5735)
  • GWCON
  • commands
  • SDLC interface (5619)
  • X.25 interface (5140)
  • FDDI (4556)
  • process
  • entering (3904)
  • GWCON and FDDI (4555)
  • GWCON commands
  • activate (4166)
  • buffer (4170)
  • clear (4173)
  • configuration (4176)
  • disable (4181)
  • enable (4184)
  • error (4186)
  • event (4188)
  • features (4190)
  • interface (4195), (4478)
  • memory (4198)
  • network (4202)
  • protocol (4205)
  • queue (4208)
  • reset (4210)
  • statistics (4212)
  • summary of (4165)
  • test (4215)
  • uptime (4219)
  • GWCON process
  • description of (4163)
  • entering and exiting (4164)
    • H
  • halt
  • OPCON command (3965)
  • hardware configuration definition program (4824)
  • HCD
  • MVS/ESA definition (4846)
  • program (4825)
  • HDLC flags
  • in Frame Relay frame (5208)
  • help
  • console command (3880)
  • hidtrace, channel interface monitoring command (5052)
  • host
  • 2216 connection, required activities (4822)
  • control blocks (4865)
  • input/output configuration program (4823)
  • programs
  • VTAM, configuring (4902), (4918)
  • how to list the protocols (4125)
  • HPDT UDP
  • 2216 definition for MVS or VM, example (4862)
  • HSSI
  • set
  • cable (5357), (5496)
  • circuit congestion defaults (5358)
  • clocking (5359), (5497)
  • crc type (5360)
  • crc-type (5347)
  • line speed (5361)
    • I
  • I.431 switch variant (5665)
  • I/O Configuration Data Set (4827)
  • IBM 2216
  • Config-Only mode (4043)
  • identifying prompts (3878)
  • ILMI functions in LAN emulation (4653)
  • image
  • loading at specific time (4004)
  • initialization file ATCSTRxx, for VTAM (4914)
  • intercept
  • OPCON command (3968)
  • intercept character (3886)
  • changing (3969)
  • interface
  • ATM configuration command (4746)
  • ATM monitoring commands (4771), (4775), (4783)
  • GWCON command (4196)
  • list of processes (3868)
  • user (3863)
  • interface device
  • adding (4063)
  • changing (4072)
  • interface monitoring commands
  • channel adapter (5045)
  • LCS (5058)
  • LSA (5067)
  • MPC+ (5077)
  • interface numbers, displaying (5043)
  • interfaces
  • configuring spare (4052)
  • spare (4485)
  • interfaces, restrictions (4054)
  • Interim Local Management Interface (4654) See also ILMI functions in LAN emulation
  • IOCDS (4826)
  • IOCP
  • definitions (4828)
  • example definition for ESCON channel (4830)
  • example definition for parallel channel adapter (4834)
  • IP (Internet Protocol), configuring using quick configuration (5716)
  • IP Control Protocol (IPCP)
  • for PPP (5437)
  • IP monitoring commands
  • ping (3976)
  • IP, configuring (5714)
  • ip-encapsulation
  • 10/100-Mbps Ethernet configuration command (4608)
  • Ethernet configuration command (4580), (4798)
  • IPv6 Control Protocol (IPv6CP)
  • for PPP (5441)
  • IPX (Internetwork Packet Exchange)
  • configuring using quick configuration (5724)
  • Ethernet encapsulation types (5727)
  • token ring encapsulation types (5725)
  • IPX Control Protocol (IPXCP)
  • for PPP (5444)
  • IPX, configuring (5722)
  • ISDN
  • accessing monitoring process (5677)
  • addresses (5651)
  • call verification (5655)
  • configuring (5662), (5667)
  • cost control over demand circuits (5654)
  • delete address (4082)
  • dial circuit contention (5652)
  • dial circuits (5648)
  • GWCON commands (5695)
  • interface restrictions (5660)
  • overview (5647)
  • PPP configuration (5661)
  • requirements and restrictions (5658)
  • sample configurations (5657)
  • switches supported (5659)
  • ISDN configuration commands
  • list (5670)
  • remove (5671)
  • set (5674)
  • set switch variant (5675)
  • summary of (5668)
  • ISDN interface
  • using (5646)
  • ISDN monitoring commands
  • calls (5680)
  • channels (5682)
  • circuits (5684)
  • L2_Counters (5686)
  • L3_Counters (5688)
  • parameters (5692)
  • statistics (5694)
  • summary of (5678)
  • TEI (5690)
    • K
  • keepalive timer, setting for XTP (5175)
  • key parameters for LAN emulation (4731)
  • keywords (5756)
    • L
  • L2_Counters
  • ISDN monitoring command (5685)
  • L3_Counters
  • ISDN monitoring command (5687)
  • LAN Channel Station (LCS)
  • 3172 emulation (5001)
  • configuring
  • 2216 (4942)
  • MVS host for TCP/IP (4852)
  • LCS interface monitoring commands
  • list (5063)
  • summary (5060)
  • tune (5066)
  • overview (4939)
  • subchannel, configuring (5004)
  • virtual interface, configuring (5000)
  • LAN destination policy (MAC address policy) (4673)
  • LAN emulation (4620)
  • address registration to the LES (4697)
  • address resolution by the LES (4700)
  • addressing in ATM (4645)
  • ATM addresses of LAN emulation components (4648)
  • ATM addressing for (4646)
  • benefits (4628)
  • Broadcast and Unknown Server (BUS) (4638)
  • Broadcast Manager (BCM) (4713)
  • BUS (4639)
  • client (4636)
  • components (4630)
  • components, ATM addresses of (4649)
  • configuration of the signaling version (4655)
  • configuration server (4635)
  • configuration server, policies and policy values (4666)
  • connecting to the BUS (4702)
  • connecting to the LES (4693)
  • ELAN name policy (4679)
  • ELAN type policy (4682)
  • establishing data direct VCCs (4709)
  • functions of the BUS (4706)
  • ILMI functions, related (4652)
  • key configuration parameters (4729)
  • LAN Emulation Configuration Server, overview of (4661)
  • LECS duplicate policy values (4688)
  • LECS LAN destination policy (MAC address policy) (4676)
  • LECS TLVs (4692)
  • LECS, overview of (4660)
  • LECS, policies and policy values (4665)
  • locating the LECS using ILMI (4658)
  • max frame size policy (4685)
  • overview (4626)
  • overview of related ILMI functions (4651)
  • overview of router extensions for LAN emulation (4711)
  • redundancy (4725)
  • reliability (4723)
  • sample assignment policies for LECS (4671)
  • security (4727)
  • server (4637)
  • signaling version (4656)
  • LAN Emulation Client (LEC) (4787)
  • configuring (4788), (4789)
  • LAN Emulation Configuration Server (4663) See also LECS
  • LAN Emulation Server (4695) See also LES
  • layer 2 tunneling
  • relationship with multilink PPP (MP) (5522)
  • Layer 2 Tunneling nets
  • configuring for MP (5531)
  • LCS
  • 3172 emulation (4948)
  • bridging
  • parameters (4947)
  • LE client (4633)
  • LE-Client
  • ATM configuration command (4744)
  • LE-Services
  • ATM configuration command (4743)
  • LEC monitoring commands
  • accessing (4804)
  • list (4807)
  • mib (4809)
  • summary of (4806)
  • LECS (4622)
  • and LAN emulation (4632)
  • and LAN extensions (4664)
  • component of LAN emulation (4662)
  • duplicate policy values (4687)
  • ELAN name policy (4678)
  • ELAN type policy (4681)
  • LAN destination policy (MAC address policy) (4674)
  • max frame size policy (4684)
  • sample assignment policies (4672)
  • TLVs (4690)
  • LES (4623), (4634)
  • address registration (4698)
  • address resolution (4701)
  • connecting to (4694)
  • Line Speed (5242)
  • Link Control Protocol (LCP)
  • packets (5406)
  • relationship to PPP (5404)
  • Link Services Architecture (LSA)
  • APPN connection
  • configuring the 2216 (4957)
  • configuring the VTAM host (4877)
  • direct connection
  • at VTAM host, configuring (4870)
  • configuring the 2216 (4952)
  • DLSw connection
  • configuring the 2216 (4960), (4965)
  • configuring the VTAM host (4885), (4893)
  • host
  • control blocks (4864)
  • LSA interface monitoring commands
  • list (5072), (5073)
  • summary (5069)
  • tune (5076)
  • overview (4950)
  • subchannel, configuring (5010)
  • virtual interface, configuring (5007)
  • list (3931)
  • 10/100-Mbps Ethernet configuration command (4610)
  • ATM configuration command (4750)
  • ATM LLC monitoring command (4785)
  • ATM monitoring commands (4777)
  • ATM Virtual Interface configuration command (4765)
  • change management configuration command (4024)
  • channel adapter
  • configuration command (5028), (5031)
  • interface configuration command (4992)
  • interface monitoring command (5047)
  • CONFIG command (4108)
  • dial circuit configuration command (5701)
  • ELS configuration command (4294)
  • ELS monitoring command (4353)
  • ELS net filter configuration commands (4329)
  • ELS net filter monitoring commands (4425)
  • Ethernet configuration command (4582)
  • Fast Token-Ring configuration command (4516)
  • Frame Relay configuration command (5321)
  • Frame Relay monitoring command (5377)
  • ISDN configuration command (5669)
  • LCS interface monitoring command (5062)
  • LEC monitoring command (4808)
  • list (5611)
  • LLC configuration command (4800)
  • LLC monitoring command (4566), (4812)
  • LSA interface monitoring command (5071)
  • MPC interface monitoring command (5081)
  • performance configuration command (4455)
  • performance monitoring command (4467)
  • Point-to-Point configuration command (5483)
  • PPP monitoring command (5505)
  • SDLC configuration command (5595)
  • SDLC monitoring command (5610)
  • SDLC Relay configuration command (5562), (5565)
  • SDLC Relay monitoring command (5576)
  • Token-Ring configuration command (4489)
  • V.25bis configuration command (5631)
  • X.25 configuration command (5128)
  • X.25 monitoring command (5132)
  • XTP configuration command (5177)
  • XTP monitoring command (5183)
  • list devices (4738)
  • list devices command (3918), (4574), (4602), (4989), (5468) , (5628)
  • listing the configuration (4124)
  • llc
  • Fast Token-Ring configuration command (4518)
  • Fast Token-Ring configuration commands (4520), (4538)
  • Fast Token-Ring monitoring command (4536)
  • Frame Relay configuration commands (5331), (5333)
  • Frame Relay monitoring commands (5385)
  • Point-to-Point configuration command (5488)
  • PPP configuration commands (5490)
  • PPP monitoring commands (5513), (5515)
  • Token-Ring configuration command (4491)
  • Token-Ring configuration commands (4493), (4511)
  • Token-Ring monitoring command (4509)
  • LLC configuration commands
  • accessing (4558)
  • list (4560), (4801)
  • set (4561), (4803)
  • summary (4559), (4799), (4811)
  • LLC monitoring commands
  • accessing (4562)
  • clear-counters (4565)
  • list (4567), (4813)
  • set (4569), (4815)
  • summary (4563)
  • LLC network interfaces
  • configuring (4557)
  • LMI management entities (5224)
  • load
  • CONFIG command (4114)
  • load file, router
  • assembling under DOS (5741)
  • assembling under UNIX (5744)
  • creating from multiple disks (5738)
  • disassembling under DOS (5747)
  • disassembling under UNIX (5750)
  • loading
  • at specific time (4003)
  • local consoles (3844)
  • local SNA Major Node control block (4904), (4908), (4920)
  • local terminals (3843)
  • local XTP
  • description (5153)
  • locating the LECS using ILMI (4659)
  • lock
  • change management configuration command (4028)
  • logging in
  • from local console (3852)
  • from remote console (3851)
  • remote login name (3850)
  • login
  • disabling (4087)
  • logout
  • OPCON command (3971)
  • loopback, APPN, configuring (5018)
    • M
  • MAC address policy (LAN destination policy) (4675)
  • max frame size policy (4669), (4683)
  • maximum information rate
  • for frame relay (5247)
  • media
  • Fast Token-Ring configuration command (4521)
  • Token-Ring configuration command (4494)
  • memory
  • displaying information about (4201)
  • erasing information (4375)
  • GWCON command (4199)
  • obtaining information about (3975)
  • OPCON command (3974)
  • message buffering
  • ELS configuration commands (4331)
  • list (4333)
  • log (4335)
  • nolog (4337)
  • set (4339)
  • ELS monitoring commands (4427)
  • flush (4429)
  • list (4431)
  • log (4433)
  • nolog (4435)
  • read-file (4437)
  • set (4439)
  • tftp (4441)
  • view (4443)
  • write-buffer (4445)
  • overview (4274)
  • messages
  • explanation (4244)
  • interpreting (4238)
  • receiving (4232)
  • messaging process
  • commands affecting (4225)
  • description of (4223)
  • entering and exiting (4229)
  • OPCON commands (4227)
  • receiving messages (4231)
  • mib
  • LEC monitoring command (4810)
  • minimum information rate
  • for frame relay (5245)
  • mod, channel adapter configuration command (5025)
  • Modem
  • disabling (4088), (4093)
  • monitoring
  • accessing the mp commands (5543)
  • ATM (4736)
  • network interfaces (3925)
  • performance monitoring commands (4461)
  • prompt, displaying (5040)
  • monitoring commands
  • LAN Emulation Client (LEC) (4790)
  • multilink ppp protocol (mp) (5545)
  • MONITR process
  • commands affecting (4224)
  • description of (4222)
  • entering and exiting (4228)
  • OPCON commands (4226)
  • receiving messages (4230)
  • MPPE options
  • listing (5486)
  • MS-CHAP
  • authentication for PPP (5413)
  • msgsz
  • SDLC monitoring command (5614)
  • multi-chassis MP (5521)
  • configuring (5534)
  • Multi-Path Channel+ (MPC+)
  • configuring
  • MVS host for TCP/IP (4855)
  • configuring APPN (4972)
  • configuring TCP/IP (4978)
  • configuring the VTAM host (4906), (4922)
  • configuring UDP+ (4975)
  • list, interface monitoring command (5082)
  • MPC+ interface monitoring commands
  • tune (5085)
  • overview (4969)
  • subchannel, configuring (5016)
  • summary, interface monitoring commands (5079)
  • virtual interface, configuring (5013)
  • multilink PPP protocol (MP)
  • configuration commands (5539)
  • configuring
  • dial circuits (5526)
  • Layer 2 Tunneling nets (5532)
  • multi-chassis MP (5535)
  • serial links (5529)
  • considerations (5518)
  • monitoring commands (5544)
  • multi-chassis (5519)
  • overview (5516)
  • relationship with layer 2 tunneling (5520)
  • multilink PPP protocol (mp) monitoring commands
  • accessing (5542)
  • multilink protocol (mp) configuration prompt
  • accessing (5537)
  • MVS host, configuring for TCP/IP (4848)
  • MVS/ESA
  • defining the 2216 to (4843)
  • hardware configuration definition (4845)
  • HCD (4844)
  • MVS/XA, defining the 2216 to (4842)
    • N
  • national disable
  • X.25 configuration command (5116)
  • national enable
  • X.25 configuration command (5114)
  • national personality, setting (5158)
  • national restore
  • X.25 configuration command (5120)
  • national set
  • X.25 configuration command (5118)
  • net, channel interface monitoring command (5048)
  • network
  • command (4991)
  • CONFIG command (4116)
  • environment (4117), (4204)
  • GWCON command (4203)
  • network command (3919), (4575), (4603), (4739), (4805) , (5469), (5629)
  • Network Control Protocols (NCP)
  • for PPP interfaces (5420)
  • AppleTalk Control Protocol (5424)
  • APPN HPR Control Protocol (5452)
  • APPN ISR Control Protocol (5455)
  • Banyan VINES Control Protocol (BVCP) (5427)
  • Bridging Control Protocol (BCP) (5430)
  • Callback Control Protocol (CBCP) (5433)
  • DECnet Control Protocol (DNCP) (5436)
  • IP Control Protocol (IPCP) (5440)
  • IPv6 Control Protocol (IPv6CP) (5443)
  • IPX Control Protocol (IPXCP) (5446)
  • OSI Control Protocol (OSICP) (5449)
  • network interface
  • accessing configuration process (3910)
  • accessing console process (3923)
  • configuring (3909), (4472), (4475), (4481)
  • console process (3908), (4474), (4480)
  • deleting (4081)
  • disabling (4183)
  • displaying information about (4109), (4180), (4197)
  • displaying the configuration (3920)
  • enabling (4218)
  • GWCON interface command (4479)
  • monitoring (3924), (4473)
  • SDLC (5621)
  • supported interfaces (3922)
  • verifying (4217)
  • X.25 (5141)
  • network software
  • displaying statistical information about (4214)
  • nodisplay
  • ELS configuration command (4296)
  • ELS monitoring command (4355)
  • nonvolatile configuration memory
  • replacing (4073)
  • noremote
  • ELS configuration command (4299)
  • ELS monitoring command (4358)
  • notrace
  • ELS configuration command (4302)
  • ELS monitoring command (4361)
  • Frame Relay monitoring commands (5387)
  • notrap
  • ELS configuration command (4304)
  • ELS monitoring command (4364)
    • O
  • obtaining status of telnet session (3995)
  • off
  • packet trace monitoring command (4401)
  • on
  • packet trace monitoring command (4403)
  • online help (3937), (3938)
  • OPCON
  • accessing the channel interface (4987)
  • channel adapter interface, console (5038)
  • OPCON commands
  • configuration (3948)
  • console (3950)
  • diags (3952)
  • divert (3954)
  • els (3957)
  • event (3959)
  • flush (3961)
  • halt (3964)
  • intercept (3967)
  • logout (3970)
  • memory (3973)
  • reload (3978)
  • status (3982)
  • summary of (3946)
  • suspend (3985)
  • talk (3987)
  • telnet (3990)
  • OPCON interface
  • configuring (3941)
  • OPCON process
  • accessing (3945)
  • commands available from (3947)
  • description (3943)
  • getting back to (3885)
  • summary (3861)
  • operating system
  • defining the 2216 to (4837)
  • orphan permanent virtual circuits
  • Frame Relay (5200)
  • orphan switched virtual circuits
  • Frame Relay (5202)
  • OSI Control Protocol (OSICP)
  • for PPP (5447)
  • OSPF (5720)
  • output
  • discarding (3963)
  • sending to other consoles (3956)
  • suspending (3966)
  • overview
  • ELS net filter configuration commands (4319)
  • ELS net filter monitoring commands (4415)
  • of software (3860)
  • virtual connections (VC) (5457)
  • overview of channel adapter (4932)
  • overview of LAN emulation (4627)
    • P
  • packet completion codes (4245)
  • packet forwarder
  • entering CONFIG environment for (4122)
  • packet trace
  • packet trace monitoring command (4368)
  • packet trace messages
  • tracing packets (4369)
  • packet trace monitoring commands
  • off (4400)
  • on (4402)
  • packet Trace (4367)
  • reset (4404)
  • set (4406)
  • subsystems (4408)
  • trace-status (4410)
  • view (4412)
  • packet-size
  • Fast Token-Ring configuration command (4523)
  • Token-Ring configuration command (4496)
  • PAP authentication for PPP (5411)
  • parallel channel adapter (PCA)
  • configuring (4983)
  • example IOCP definition (4835)
  • overview (4934)
  • parameter defaults
  • X.25 (5092)
  • parameters
  • configuring (4131)
  • event number (4240)
  • for LAN emulation (4730)
  • ISDN monitoring command (5691)
  • key LAN emulation (4625)
  • V.25bis monitoring commands (5641)
  • X.25 monitoring command (5134)
  • password, setting for user (4066)
  • passwords (3849)
  • patch
  • CONFIG command (4119)
  • PCA
  • configuring (4984)
  • example IOCP definition (4836)
  • overview (4935)
  • perf command (4448)
  • performance
  • configuring (4446)
  • performance configuration commands
  • disable (4450)
  • enable (4452)
  • list (4454)
  • set (4456)
  • summary (4449)
  • performance monitoring commands
  • accessing (4458)
  • disable (4462)
  • enable (4464)
  • list (4466)
  • report (4468)
  • set (4470)
  • summary of (4460)
  • physical-address
  • Ethernet configuration command (4583), (4611)
  • pin parameter
  • setting (4311)
  • ping
  • IP monitoring command (3977)
  • planning and preparation
  • 2216 ESCON adapter (4926)
  • host (4818), (4925)
  • Point-to-Point configuration commands
  • accessing (5470)
  • list (5484)
  • LLC (5489)
  • summary of (5471)
  • Point-to-Point interfaces
  • configuring (5465)
  • Point-to-Point network interface
  • using (5394)
  • Point-to-Point Protocol (PPP) (5438)
  • accessing the configuration process (5466)
  • address fields (5398)
  • AppleTalk Control Protocol (5423)
  • APPN HPR Control Protocol (5451)
  • APPN ISR Control Protocol (5454)
  • authentication (5410)
  • Banyan Vines Control Protocol (BVCP) (5426)
  • Bridging Control Protocol (BCP) (5429)
  • Callback Control Protocol (CBCP) (5432)
  • control field (5399)
  • DECnet Control Protocol (DNCP) (5435)
  • flag fields (5397)
  • frame check sequence field (5402)
  • frame structure (5396)
  • information field (5401)
  • IPv6 Control Protocol (IPv6CP) (5442)
  • IPX Control Protocol (IPXCP) (5445)
  • LCP packets (5405)
  • Link Control Protocol (LCP) (5403)
  • link establishment packets (5407)
  • link maintenance packets (5409)
  • link termination packets (5408)
  • Network Control Protocols (NCP) (5421)
  • OSI Control Protocol (OSICP) (5448)
  • overview (5395)
  • protocol field (5400)
  • policies (4621)
  • agreement of (4670)
  • policies and policy values (4667)
  • PPP
  • IP Control Protocol (IPCP) (5439)
  • PPP callback
  • configuring (5419)
  • PPP configuration commands
  • list
  • ccp (5485)
  • ecp (5487)
  • set (5492)
  • setting IPCP parameters (5493)
  • setting LCP parameters (5494)
  • PPP interface monitoring process
  • accessing (5500)
  • PPP monitoring commands
  • clear (5504)
  • list (5506)
  • dn (5510)
  • dncp (5509)
  • osi (5512)
  • osicp (5511)
  • listing IPCP parameters (5507)
  • listing LCP parameters (5508)
  • llc (5514)
  • summary of (5501)
  • problem analysis and resolution (4927)
  • process
  • second-level
  • accessing (3895), (3905)
  • processes
  • communicating with (3867)
  • list of (3866)
  • prompt, monitoring, displaying (5042)
  • prompt-level
  • additional functions of
  • display hostname with carriage return (4139)
  • display hostname with changes (4135)
  • display hostname with date (4137)
  • display hostname with time (4136)
  • display hostname with VPD (4138)
  • configuration command
  • add prefix to hostname (4132)
  • display hostname (4134)
  • prompts
  • CONFIG (3876)
  • device processes (3873)
  • GWCON (3875)
  • identifying (3877)
  • OPCON (3874)
  • protocol
  • CONFIG command (4121)
  • configuration process (4476), (4482)
  • console process (4477), (4483)
  • entering configuration process (3930)
  • GWCON command (4206)
  • protocol command (3932), (3936)
  • protocol console process
  • entering (3934)
  • protocols
  • configuration and console processes
  • accessing (3927)
  • configuring using quick configuration (5712)
  • console process (3903)
  • displaying information about (4179)
  • entering configuration environment for (4123)
  • entering console process (3933)
  • generating a list of (4126)
    • Q
  • qconfig
  • CONFIG command (4128)
  • QoS
  • ATM configuration command (4752)
  • queue
  • GWCON command (4209)
  • Quick Config mode (4045)
  • manual entry (4046)
  • quick configuration (3869), (3900)
  • bridging configuration (5709)
  • description (4044)
  • protocol configuration
  • IP user interface (5715)
  • IPX user interface (5723)
  • procedure (5711)
  • Quick Configuration Reference (5707)
    • R
  • radius (5754)
  • reconfiguration (4929)
  • redundancy of LAN emulation servers (4726)
  • reliability of LAN emulation (4724)
  • reload
  • OPCON command (3856), (3979)
  • reloading (3902)
  • device (3854)
  • remote
  • ELS configuration command (4307)
  • ELS monitoring command (4371)
  • remote AAA attributes (5751)
  • keywords (5757)
  • radius (5755)
  • TACACS (5759)
  • remote consoles (3846)
  • remote device
  • authentication
  • configuring PPP interface for (5415)
  • configuring PPP interface to use (5417)
  • remote DTE, searching for (5151)
  • remote logging
  • additional considerations (4266)
  • duplicate logging (4270)
  • messages containing IP addresses (4268)
  • recurring sequence numbers (4272)
  • output examples (4264)
  • remote login (3853)
  • remote terminals (3847)
  • remove
  • ATM configuration command (4754)
  • ATM Virtual Interface configuration command (4767)
  • ELS monitoring command (4374)
  • Frame Relay configuration command (5334)
  • ISDN configuration command (5672)
  • report
  • performance monitoring command (4469)
  • reset
  • GWCON command (4211)
  • packet trace monitoring command (4405)
  • X.25 monitoring command (5136)
  • restarting the IBM 2216 (5733)
  • restore
  • ELS monitoring command (4377)
  • retrieve
  • ELS monitoring command (4379)
  • RIP (5719)
  • route descriptor policy (4668)
  • router
  • displaying information about (4110)
  • router extensions for LAN emulation (4712)
  • router load file
  • assembling under DOS (5740)
  • assembling under UNIX (5743)
  • creating from multiple disks (5737)
  • disassembling under DOS (5746)
  • disassembling under UNIX (5749)
  • router software
  • communicating with (4207)
    • S
  • sample, quick configuration (5708)
  • save
  • ELS monitoring commands (4382)
  • SDLC
  • accessing configuration (5584)
  • configuration procedure (5579)
  • configuration requirements (5582)
  • configuring (5578), (5583)
  • network interface (5620)
  • switched call-in interface
  • configuring (5580)
  • SDLC configuration commands
  • add (5588)
  • delete (5590)
  • disable (5592)
  • enable (5594), (5609)
  • list (5596)
  • msgsz (5615)
  • set (5598)
  • summary of (5585)
  • SDLC connections
  • support for (5586)
  • SDLC monitoring commands
  • accessing (5599)
  • clear (5604)
  • link counters (5613)
  • list (5612)
  • summary of (5600)
  • SDLC Relay
  • accessing configuration (5548)
  • accessing monitoring environment (5568)
  • configuring (5546), (5547)
  • SDLC Relay configuration commands
  • add (5551)
  • delete (5554)
  • disable (5557)
  • enable (5560)
  • list (5563), (5564)
  • set (5567)
  • summary of (5549)
  • SDLC Relay monitoring commands
  • clear-port-statistics (5571)
  • disable (5573)
  • enable (5575)
  • list (5577)
  • summary of (5569)
  • second-level
  • process
  • accessing (3896), (3906)
  • security of LAN emulation (4728)
  • selector (4644)
  • serial line interface
  • accessing the configuration process (5087)
  • serial line interfaces
  • configuring (5086)
  • serial PPP links
  • configuring for MP (5528)
  • session
  • terminating (3972)
  • set
  • ATM configuration command (4756)
  • change management configuration command (4030)
  • channel adapter
  • configuration command (5034)
  • CONFIG command (4130)
  • dial circuit configuration command (5703)
  • ELS configuration command (4310)
  • ELS monitoring command (4385)
  • Fast Token-Ring configuration command (4525)
  • Frame Relay configuration command (5342)
  • Frame Relay monitoring command (5390)
  • ISDN configuration commands (5673)
  • LLC configuration command (4802)
  • LLC monitoring command (4568), (4814)
  • packet trace monitoring command (4407)
  • performance configuration command (4457)
  • performance monitoring command (4471)
  • PPP configuration command (5491)
  • SDLC configuration command (5597)
  • SDLC monitoring command (5616)
  • SDLC Relay configuration command (5566)
  • Token-Ring configuration command (4498)
  • V.25bis configuration command (5633)
  • X.25 configuration command (5108)
  • XTP configuration command (5173)
  • setting and changing time, date, and clock (4154)
  • signaling version configuration in LAN emulation (4657)
  • software
  • overview (3859)
  • user interface (3862)
  • source-routing
  • Fast Token-Ring configuration command (4527)
  • Token-Ring configuration command (4500)
  • speed
  • Fast Token-Ring configuration command (4530)
  • Token-Ring configuration command (4503)
  • start-up parameter for VTAM, ATCSTRxx (4913)
  • statistics
  • clearing (4175)
  • ELS monitoring command (4390)
  • GWCON command (4213)
  • ISDN monitoring command (5693)
  • V.25bis monitoring commands (5643)
  • X.25 monitoring command (5138)
  • status
  • OPCON command (3983), (5467)
  • subchannels
  • LCS, configuring (5003)
  • LSA, configuring (5009)
  • MPC+, configuring (5015)
  • number provided (4937)
  • subsystems
  • packet trace monitoring command (4409)
  • suggestions
  • configuration (3888)
  • suspend
  • OPCON commands (3986)
  • switch variant (5666)
  • setting for ISDN (5676)
  • switched major node definition file, examples
  • LSA APPN connection at VTAM host (4884)
  • LSA direct connection at VTAM host (4876)
  • LSA DLSw connection at VTAM host (4892)
  • LSA DLSw local conversion at VTAM host (4898)
  • VTAM control block (4869)
  • switched SDLC call-in interface
  • configuring (5581)
  • system dumps, using (4056)
  • system retrieve
  • CONFIG command (4146)
  • system view
  • CONFIG command (4148)
    • T
  • TACACS (5758)
  • talk
  • OPCON command (3988), (4447), (4459)
  • TCP/IP
  • 2216 definition for MVS or VM for LCS, example (4858)
  • 2216 definition for MVS or VM for MPC+, example (4860)
  • configuring LAN Channel Station (LCS) (4853)
  • configuring Multi-Path Channel+ (MPC+) (4856)
  • configuring MVS host (4850)
  • TCP/IP passthru
  • configuring (4945)
  • TCP/IP, transporting X.25 traffic over (5143)
  • TDM (time division multiplexing) (5187)
  • technical support access (4049)
  • TEI
  • ISDN monitoring command (5689)
  • telnet
  • closing a connection (3996)
  • obtaining status of Telnet session (3993)
  • OPCON command (3991)
  • quitting a session (3997)
  • telnet command (3992)
  • telnet connections (3848)
  • closing (3999)
  • obtaining status of (3994)
  • test
  • GWCON command (4216)
  • SDLC monitoring commands (5617)
  • test (5618)
  • TFTP
  • tftp
  • change management configuration command (4032)
  • description of
  • related to change management (4002)
  • time
  • activated load of image (4005)
  • CONFIG command (4151)
  • setting and changing (4155)
  • timedload
  • Boot CONFIG command (4034)
  • Tinygram compression (5495)
  • TLVs
  • defined on an ELAN basis (4689)
  • token ring
  • encapsulation types for IPX (5726)
  • Token-Ring configuration commands
  • accessing (4487)
  • enabling for LLC (4502)
  • list (4490)
  • LLC (4492)
  • llc (4510)
  • media (4495)
  • packet-size (4497)
  • set (4499)
  • source-routing (4501)
  • speed (4504)
  • summary of (4488)
  • Token-Ring Interface
  • statistics displayed for (4512)
  • Token-Ring monitoring commands
  • accessing (4505), (4532)
  • dump (4508)
  • summary of (4506)
  • Token-Ring network interfaces
  • configuring (4486)
  • trace
  • ATM monitoring commands (4779)
  • ELS configuration commands (4392)
  • Frame Relay monitoring commands (5391)
  • trace, channel interface monitoring command (5054)
  • trace-status
  • packet trace monitoring command (4411)
  • Transport Resource List (TRL) control block (4905), (4909), (4921), (4924)
  • trap
  • ELS configuration commands (4317)
  • ELS monitoring command (4395)
  • tune
  • LCS interface monitoring command (5065)
  • LSA interface monitoring command (5075)
  • MPC+ interface monitoring command (5084)
  • tune, channel interface monitoring command (5056)
  • type length values (4691) See also TLVs
    • U
  • UNIX
  • assembling a load file (5742)
  • disassembling a load file (5748)
  • unlock
  • change management configuration command (4036)
  • unpatch
  • CONFIG command (4157)
  • update
  • CONFIG command (4159)
  • update-firmware
  • change management configuration command (4038)
  • updating
  • configuration (3893)
  • uptime
  • GWCON command (4220)
  • user access
  • adding user (4064)
  • changing password (4074)
  • changing user (4075)
  • configuring (4048)
  • deleting user (4084)
  • listing user information (4111)
  • setting password (4065)
  • user interface
  • processes (3865)
  • software (3864)
    • V
  • V.25bis
  • accessing configuration (5627)
  • accessing monitoring process (5635)
  • adding addresses (5623)
  • configuring (5622), (5626)
  • GWCON commands (5645)
  • V.25bis configuration commands
  • list (5632)
  • set (5634)
  • summary of (5630)
  • V.25bis monitoring commands
  • calls (5638)
  • circuits (5640)
  • parameters (5642)
  • statistics (5644)
  • summary of (5636)
  • V25bis address (4112)
  • variable information rate
  • for frame relay (5249)
  • VCs
  • Frame Relay (5189)
  • view
  • ELS monitoring command (4399)
  • packet trace monitoring command (4413)
  • virtual
  • interface
  • LCS, configuring (4999)
  • LSA, configuring (5006)
  • MPC+, configuring (5012)
  • network handlers (4936)
  • virtual connections (VC)
  • configuring (5462)
  • considerations (5459)
  • overview (5456)
  • VM/ESA, defining the 2216 to (4841)
  • VM/SP, defining the 2216 to (4839)
  • VM/XA, defining the 2216 to (4840)
  • VSE/ESA, 2216 definition (4847)
  • VTAM
  • configuring the host
  • APPN connection, LSA (4879)
  • DLSw connection (4886)
  • MPC+ (4903), (4919)
  • initialization file ATCSTRxx (4911)
  • LSA direct connection, configuring (4872)
  • start-up parameter (4910)
    • W
  • wildcards, DTE address (5148)
  • wrap
  • ATM monitoring commands (4781)
  • write
  • CONFIG command (4162)
    • X
  • X.25
  • parameter defaults (5093)
  • X.25 configuration commands
  • add (5123)
  • change (5125)
  • delete (5127)
  • disable (5113)
  • enable (5111)
  • list (5129)
  • national disable (5117)
  • national enable (5115)
  • national restore (5121)
  • national set (5119)
  • set (5109)
  • summary of (5107)
  • X.25 interfaces
  • bilateral closed user groups
  • overview (5097)
  • closed user groups
  • configuring (5105)
  • establishing circuits (5101)
  • extended types (5099)
  • overriding processing for cug 0 (5103)
  • overview (5095)
  • X.25 monitoring commands
  • list (5133)
  • parameters (5135)
  • reset (5137)
  • statistics (5139)
  • summary of (5131)
  • X.25 network interface
  • accessing the monitoring process (5130)
  • configuring (5106)
  • national personality (5091), (5734)
  • statistics (5142)
  • using (5090)
  • X.25 Transport Protocol (XTP) (5144) See also XTP
  • XCA major node definition file, examples
  • LSA APPN connection at VTAM host (4882)
  • LSA direct connection at VTAM host (4874)
  • LSA DLSw connection at VTAM host (4890)
  • LSA DLSw local conversion at VTAM host (4896)
  • VTAM control block (4867)
  • XTP
  • backup peer function (5149)
  • closed user groups
  • overview (5156)
  • configuration commands
  • Add (5164)
  • Change (5166)
  • Delete (5168)
  • Disable (5172)
  • Enable (5170)
  • List (5178)
  • Set (5174)
  • configuration procedures (5157)
  • configuring (5160)
  • configuring commands (5162)
  • local XTP
  • description (5154)
  • monitoring commands
  • Add (5180)
  • Delete (5182)
  • List (5184)
  • setting keepalive timer (5176)
  • setting natioinal personality (5159)
  • using (5145)

    • [ Top of Page | Previous Page | Table of Contents | Index ]